Formax FD 320 - Manual (Page 5)

3
OPERATION
Adjusting the fold plates:
To adjust fold plates to desired fold and length of paper, first loosen the two thumbscrews on each of
the two fold plates. Second, align the center bar so the marks on each side of the fold plates match
up.
Letter, accordion and half folds are clearly marked on each fold plate with blue lines. An adjustment
can be made by loosening the thumbscrew and slightly moving the center bar up or down. Tighten the
thumbscrews before operation.
For a “half” fold you must remove the lower fold plate and rotate it 180 degrees and reinsert the fold
plate.
NOTE: Remember to tighten the thumbscrews and replace the fold plates before operating.