Formax FD 2000 Operator Manual, 5th Edition - Manual (Page 7)

5
TROUBLESHOOTING
1. If paper folds left or right adjust the skew adjuster. To adjust the skew, turn it left or right until the paper is
feeding correctly and folds squarely.
B. Paper Pulls Left or Right During Feeding:
WARNING: Turn off machine and unplug cord from its receptacle
1. If a jam occurs in a fold plate, unplug and remove the fold plate and remove paper. Reinstall fold plate and
then press the reset button on the control panel to clear the fault signal.
2. If a jam occurs in between the metal sealing rollers, remove any remaining forms from the hopper. Open
the top cover and remove the upper fold plate. Remove the jam-clearing tool (located under the top fold plate),
apply the tool to the upper metal roller and turn clockwise until the paper jam is clear (
Caution: Do not apply
excessive force or rollers may be damaged) . Remove the jammed form and return tool in holder and reinstall
the upper fold plate. Reinstall cover and press the reset button.
Note: Press the black button near the power cord inlet to reset the breaker if necessary.
A. Clearing Paper Jams and Fault Signals on the Display Panel:
1. Adjust the side guides to the edge of the forms.
2. Clean the 3 infeed wheels with a cloth dampened with a mild household cleaner.
C. Skewed Forms
2. Side guides should be adjusted so that the forms do not have free play between the guides.