Formax FD 2000 Operator Manual, 5th Edition - Manual (Page 10)

OPTIONAL CONVEYOR INSTALLATION
Mounting Bolts
Stacker Wheels
To install the 18” conveyor you should follow these steps:
1. Unplug the 2000/2030 from the wall outlet.
2. Remove upper fold table
3. Turn the machine on to the non-operator side and remove the catch tray from machine. Return the machine
to its upright position.
4. Plug the power cord into the underside of the conveyor.
5. Install conveyor mounting bolts (figure 5)
6. Attach the conveyor to the 2000/2030.
7. Install the stacker wheel assembly into the holes indicated in figure 6.
8. Adjust the stacker wheels to conveyor decal (figure 6).
9. Plug the conveyor power cord into the power outlet on the 2000/2030.
10. Reinsert the upper fold table.
11. Plug the 2000/2030 into the wall outlet.
Holes for Stacker Wheel
Assembly
8