Formax FD 1500 Plus - Manual (Page 6)

2
Start Starts machine.
Stop Stops machine.
Ready light Steady green when power is on.
Blinks red when cover is open or fault is detected.
Counter Reset Resets counter
Counter Shows forms count
UNPACKING AND SET UP
1. Check package for shipping damage. If there is shipping damage, do not discard the box.
2. CAUTION: Two people must lift machine out of the box.
3. To attach the conveyor to the out-feed, align the tab on the right side of the conveyor with the slot
on the machine (Figure 1a). Rest it upon the two alignment studs (see arrows), and tighten the four
thumbscrews provided (Figure 1b).
4. Plug cord into machine and into wall outlet.
Figure 1b
CONTROL PANEL
Figure 1a