Formax FD 1500 Plus - Manual (Page 12)

8
INSTALLING OPTIONAL FLOW STRAPS
Figure 8a
Figure 9
3. With strap in place, press clip down over strap. (figure 9)
4. Figure 10 shows strap and clip in place.
NOTE: Clip must be removed before moving strap to a different location.
Figure 10
Figure 11
5. Repeat process on other side. Figure 11 shows two straps in place.
Flow
Strap
1. Optional Flow Straps can be used when processing thicker paper stock. To install, fold over 1/2 inch of
strap. (figure 8a)
2. Place strap over static brush in appropriate location. (figure 8b)
NOTE: Straps should not be placed where they will interfere with the conveyor belts or the weighted outfeed
tires, (see figure 11).
Figure 8b
Flow
Strap