Fluke Biomedical ESA180 - Manual (Page 40)

180
Users Guide
2-18
W Caution
To avoid damage to the Analyzer or adverse affects on its
performance, clean it only by gently wiping down with a
clean, lint-free cloth dampened with a mild detergent
solution. Do not spray liquids on or immerse the unit.
Carefully wipe down the cables and inspect them for damage and deterioration
of the insulation. Check the cable connections for integrity of the cable clamp
and strain relief.
Service and Calibration
If your new Analyzer fails to operate successfully, please contact Fluke
Biomedical Service Center immediately, as indicated under “Warranty and
Product Support.”
W Caution
To avoid damage to the Analyzer or adverse affects on its
performance, a llow only qualified technical personnel to
service the Analyzer.
Annual calibration of the Analyzer by an authorized Fluke Biomedical Service
Center is recommended. Fluke Biomedical Service Centers have the
appropriate tools and procedures for performing calibrations as well as factory-
authorized updates.
International customers should contact their Fluke Biomedical dealers for
service/product support.
To obtain the name of your local dealer or service center, contact Fluke
Biomedical as indicated under “Return Procedures, Repair and calibration.”
Packing Instructions
If repairs are required, return the Analyzer to the factory or the nearest service
center, as follows:
1. Before returning the Analyzer for factory service, contact the Fluke
Biomedical Service Center for a required Return Authorization Number.
2. Provide the following information: