Fluke Biomedical 440RF - Manual (Page 7)

General Information
Getting Started
1
1-3
1.3 Getting Started
Receiving Inspection
Upon receipt of the unit:
1. Check the shipping carton(s) and their contents for in-shipment damage. If damage is evident, file
a claim with the carrier and contact Fluke Biomedical, Radiation Measurement Services at
440.248.9300 immediately.
2. Check that all items listed on the packing slip are present and in good condition. If any items are
missing or damaged, contact Fluke Biomedical.
Storage
If the unit is to be stored prior to use, pack it in the original container(s) if possible, and store in an
environment free of corrosive materials, fluctuations in temperature and humidity, and vibration and
shock.
Routine Cleaning
Do not immerse the Model 440RF/D or Model
440RF/D-SI. The unit is not waterproof. Liquid
could damage the circuits. The unit should be kept
clean and free from dirt and contamination. The unit
may be cleaned by wiping with a damp cloth using
any commercially available cleaning or
decontaminating agent.
NOTE