Fluke Biomedical 960SF-220 - Manual (Page 15)

Maintenance, Calibration and Troubleshooting
Maintenance
3
3-1
Section 3
Maintenance, Calibration and Troubleshooting
3.1 Maintenance
No periodic maintenance is required for the module.
If a maintenance question arises and cannot be
resolved by using this manual, please contact the
Fluke Biomedical at 440.248.9300 for assistance.
3.2 Calibration
The 960SF-220, 960SF-221, 960SF-230 and 960SF-231 modules do not require any calibration.
3.3 Troubleshooting
Extreme care must be used when troubleshooting a
system that has power applied. All standard
troubleshooting precautions apply.
Once a problem has been located, remove all
power before continuing with the repair.
Personnel performing the following procedure must
be familiar with the operation of the monitoring
system and the location of each piece of equipment
used in the system.
If a problem develops, verify that the voltages at connection point inputs and outputs are present and that
all wiring is secure. Refer to Appendix B for drawings.
NOTE
WARNING
WARNING
CAUTION