Fluke Biomedical PS320 - Manual (Page 19)

Fetal Simulator
Powering the Simulator
11
Table 3. Controls, Indicators, and Connectors (cont.)
Item Name Description
Maternal Maternal ECG signal
F
ECG Connectors
Reference Ground reference lead
G
RS-232 6-pin mini-DIN plug connector for the serial connection.
H
Toco 6-pin mini-DIN connector for the Toco signal cable.
I
US 1 & US 2 8-pin mini-DIN plug connector for ultrasound cable plugs.
Powering the Simulator
The Simulator uses a 9-V alkaline battery. When it
detects less than about 5.6 volts, it goes into a shutdown
mode, sounds a continuous tone alarm, and displays the
following message:
The battery resides in the base of the instrument. Use a
9-volt alkaline battery (Duracell
®
MN1604 or equivalent).
Do not use mercury, air, or carbon-zinc batteries.
W Warning
The 9-volt alkaline battery provided with the
Simulator may explode or leak if recharged,
inserted improperly, or disposed of in a fire.
Dispose of the battery in accordance with
any applicable state or local regulations.