Flowserve PM15E Electro-Pneumatic Valve Positioner - Manual (Page 12)

Pos Part No. Qty Description
1 1 Housing
2 P5-2 1 Front Cover Including O-Ring
3 P5-AS3N 1 Connecting Block NPT 1 /
4
"
Assembly
4 P5-4 1 Relief Valve Spring
6 P5-6EP 1 Gasket for EP5
7 P5-7 1 Diaphragm Cover Including
O-Ring
8 P5-8 1 Diaphragm
9 P5-9 2 Diaphragm Washer
10 P5-10 1 Balance Arm
13 P5-AS13/315 1 Feedback Spring
3-15 PSI Assembly
18 P5-18 1 Lower Arm Assembly
19 P5-19 1 Rod
20 P5-20 1 Spring
21 P5-21A 1 Indicator Arrow
22 P5-22T 1 Indicator Cover Transparent
Including O-Ring
24 P5-24 1 Twist Stop
25 P5-25 1 Pilot Valve Including O-Rings
26 P5-26 1 Shaft Including O-Rings,
Screw
27 P5-27 1 Cam, Locking Nut Including
Screw
29 P5-29 1 Zero Cover
30 P5-30 1 Cover
31 P5-31 1 Mounting Adapter Including
Screws
32 P5-32 1 Ball Bearing
Pos Part No. Qty Description
35 P5-xx/xx 1 Identification Cover
36 12047N 4 Plug NPT 1 /
8
"
37 P5-K1 1 Cam
38–45 P5-Screws 1 Screw Set P5/EP5
75–80
46–53 P5-Seal NBR 1 O-Ring Set P5/EP5
81–83, 6, 67, 70 Nitrile, NBR
46–53 P5-Seal Q 1 O-Ring Set P5/EP5
81, 83, 6, 67, 70 Silicone Q
54 P5-S3 1 Spindle Adaptor
I/P Unit Part List
61 1 I/P Box
62 E5-2 1 I/P Cover Including Screws
63 E5-AS3N 1 I/P Nose NPT 1 /
4
" Assembly
64 P5-4 1 Relief Valve Spring
65 P5-5 1 Filter Plug Including Filter 66,
O-ring, 81
66 E5-6 1 Filters (5 per Package)
67 E5-7 1 Gasket I/P
71 E5-STD 1 I/P Converter
73 E5 N-AS 11 1 Mounting Bracket Round I/P
Including Screws, O-Rings,
I/P Nose
E5 G-AS 11
74 FU-STD 1 Enclosure Including I/P
Converter Std.
74 E5-EX/US 1 Enclosure Including I/P
Converter, Explosion-Proof
FM, CSA
Spare Part List
Flow Control Division
Worcester Controls
© 2003 Flowserve Corporation, Irving, Texas, USA. Flowserve and Worcester Controls are registered trademarks of Flowserve Corporation. WCAIM2017 10/03 Printed in USA
For more information about Flowserve Corporation, contact www.flowserve.com or call USA 1-800-225-6989.
FLOWSERVE CORPORATION
FLOW CONTROL DIVISION
1978 Foreman Drive
Cookeville, Tennessee 38501 USA
Phone: 931 432 4021
Facsimile: 931 432 3105
www.flowserve.com
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function
safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial
service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore
assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation
Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as a guarantee of
satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve
is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning
these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.