Drolet Nova 820 - Manual (Page 13)

ELATION Fireplace Insert 13
GLASS FRONT REMOVAL, CLEANING AND INSTALLATION
Removal:
• Let the insert cool down for at least one hour.
• Open the top and bottom louvres to reveal the retaining brackets.
• Remove the two (2) screws holding the top bracket and remove the bracket still
holding the glass in place.
• Lift out glass. (Do not let glass fall forward!)
CAUTION : Do not operate your insert without a glass front or with a broken glass.
Cleaning:
• Only clean the glass when cold.
• Clean with liquid type cleaners or soap and water; do not use abrasive cleaners,
which can scratch the glass.
Installation:
• Place the glass front assembly back in position. Align the top bracket with the holes for the
screws.
• Install the two (2) screws.