Dixon 12881-106 - Manual (Page 19)

CONTROLS
19
PARKING BRAKE:
A parking brake is located to the left of the seat.
The engine will kill if control levers are not in the outboard
position when the parking brake is engaged.
To engage brake: pull up and back
To disengage brake: push forward and down
Note: The parking brake is not intended to be used as
a service brake.
Note: Always set parking brake before dismounting.
Release the parking brake before moving mower.
Note: Engage parking brake before starting engine.
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to the right and front of the operator.
Controls the cutting height.
Ten positions of adjustment.
Depress trigger and move lever forward to lower deck.
Depress trigger and pull lever back to raise deck.
Select cut height & insert pin into first hole below the lift lever.
Ten holes are provided for a down stop so you can easily return
from transport to desired cut height.
SEAT:
Fore & Aft: Move lever, slide seat fore & aft to desired position,
release.