Flowserve Mach 1 User Manual

Page 12

User Instructions Mach 1 High Performance Plug Valve - DVENIM0300-01 - 03.13

Flowserve Corporation
Flow Control Division
1978 Foreman Drive
Cookeville, Tennessee 38501
Phone: +931 432 4021
Fax: +931 432 3105
www.flowserve.com

Flowserve Ahaus GmbH

Von Braun Straße 19a

D-48683 Ahaus

Germany

Phone: +49 2561 686-0

Fax: +49 2561 686-39

Flowserve Pte. Ltd.

12 Tuas Avenue 20

Republic of Singapore 638824

Phone: +65 862 3332

Fax: +65 862 2800

Your contact:

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve

product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be

aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can

(and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must the-

refore assume the ultimate responsibility for the proper sizing and selection, installation,

operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM)

instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific

application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and

should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a war-

ranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving and upgrading

its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise

concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices.

FCD DVENIM0300-01 03/13 Printed in USA.