Fire Magic 3046 Infrared Burner - Manual (Page 2)

REV 2 - 1208201328 L-C2-155 2
5. Remove and replace existing orifi ces ( Fig. 2-1)
with the ones supplied with your IR burner. For 2
series units, supplied orifi ce size is #49 for natural
gas and #57 for propane gas. For 1 series units,
supplied orifi ce size is #53 for natural gas and #63
propane gas.
6. Carefully place the IR burner into the fi rebox ( Fig.
2-2), ensuring that:
a. the burner gas inlets (Fig. 2-3) face the front
of the grill, or the right on Deluxe models.
b1. the black ignitor wire passes up under the inner
liner & over the manifold plate (see Fig. 2-4)
OR
b2. for the Deluxe, the wire wraps around the
outside of the burner manifold and follows gas
line - do not pass across inside of the fi rebox.
c. the IR burner orifi ce ports fi t over the orifi ces (Fig.
2-5).
INSTALLATION (cont.)
Fig. 2-1
Remove existing
orifi ces & replace with
new orifi ces supplied
Fig. 2-2
Note: 2 left burners
removed
IGNITOR
IR BURNER TOP
BURNER GAS
INLET
ORIFICE PORT
Fig. 2-3 IR burner ports
Ignitor
Orifi ce port
Burner gas inlet
Inserting IR burner after removal of
burners, air shutters, & springs
MANIFOLD
PLATE
INNER
LINER
IR WIRE
Inner
liner
IR wire
Manifold
plate
Fig. 2-4
BURNER GAS
INLETS
BARBECUE
ORIFICES
Burner gas
inlets
Grill
orifi ces
Slide IR burner forward so that the orifi ce
ports fi t over the orifi ces
Fig. 2-5
Front of grill
Pass the IR
ignitor wire
under the grill
liner and over
the manifold
plate