Fire Magic Echelon Diamond Master Switch Replacement Instructions - Manual (Page 2)

REV 0 - 1112021032 L-C2-382 2
9. Ensuring the O-ring is fl at against the master switch; insert the
new master switch into the opening. Use the nut provided with
your new master switch to hand tighten the switch in place. Use
pliers or an open end wrench to secure. Reference Fig. 2-1.
10. Connect the wire harness (see Fig. 2-2).
11. Connect the power supply, & test your new master switch prior
to replacing the control panel.
12. Set the control panel back over the front lip of the grill, being
sure that the lid-closed-sensor protrudes through the hole on
the upper right of the control panel (if applicable). Replace
the screws.
13. Replace the smoker drawer, drip tray, lighted bezels, and
control knobs.
14. With the knobs in the OFF position, turn on the gas supply.
Fig. 2-1 Installing master switch
Fig. 2-2 Connect wire harness
Connect
wire harness