Connecting the ipod – Dodge 2010 Challenger User Manual
Page 215
This feature allows you to plug an iPod
into the
vehicle’s sound system through a 16–pin connector using
the provided interface cable.
UCI supports Mini, 4G, Photo, Nano, 5G iPod
and
iPhone
devices. Some iPod software versions may not
fully support the UCI features. Please visit Apple’s
website for software updates.
NOTE:
• If the radio has a USB port, connecting an iPod to this
port does not play the media. For playing an iPod
,
use the separate 16–pin connector port located in the
center console.
• Connecting an iPod to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod
ா
Use the provided connection cable to connect an iPod
to
the vehicle’s 16–pin connector port located on the center
console. Once the iPod
is connected and synchronized
to the vehicle’s UCI system (iPod
may take a few
seconds to connect), the iPod
starts charging and is
ready for use by pressing radio switches, as described
below.
NOTE:
• You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
• If the iPod battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod
connected
to the UCI system may charge it to the required level.
214
UNDERSTANDING YOUR INSTRUMENT PANEL