FiberPlex TIS-8632 - Manual (Page 5)

Page 3
Introduction
Elegantly simple yet packed with an advanced feature set, the FiberPlex Technologies TIS‐8632 is a powerful 6
Port 10/100/1000 Ethernet Switch. The unit interfaces UTP RJ‐45 jacks (x4) to variously populated SFP
positions.
Key Features

6 Ports – (4) 10/100/1000BASE‐T Copper and (2) 1000BASE‐X Optical

Flow control for full duplex and half duplex

Supports up to 10k byte JUMBO frame

Supports Ports Based VLANS and TAG Based VLANS

Conforms to FCC and CE codes

Includes power adapter as well as a 3‐position Phoenix™ connector
The TIS‐8632 is housed in the commercial ‘Throw Down’ packaging. This version is designed to be a work horse
unit in various commercial and industrial environments. It is powered either by a 9VDC ‘Wall Wart’ style
supply (included) or via bussed power supplied through an integrated three pin Phoenix™ connector. Up to
three TIS‐8632 units can be installed in the optional 1U TDR‐01 rack shelf.
Standard Ordering Options
TIS‐8632‐C – Unit with no SFP modules included
TIS‐8632‐L22 – Unit with (2) 1310 nm Multimode SFP modules (SFP‐MC24XC‐3131‐2) included. Conforms to
IEEE 1000BASE‐LX standard.
TIS‐8632‐L5B – Unit with (2) 1310 nm Singlemode SFP Modules (SFP‐SC24XC‐3131‐B) included. Conforms to
IEEE 1000BASE‐LX10 standard.
Getting Started
Initial Inspection
Immediately upon receipt, inspect the shipping container for damage. The container should be retained until
the shipment has been checked for completeness and the equipment has been checked mechanically and
electrically. If the shipment is incomplete, if there is mechanical damage, or if the unit fails to operate notify
FiberPlex and make the shipping materials available for the carrier's inspection.