DirecTV D10-300 - Manual (Page 7)

Video output 1
Left/right Audio output 1
Secondary Audio/Video Outputs
(*) SELV: Safety Extra Low Voltage
(**) TNV3:Telecommunication
Network Voltage
(***) HV: Hazardous Voltage
Front and Rear Panels
7
Front Panel
Info button
Switches between program
information in the banner and
the program details screen.
Active button
For future use.
SELECT button
Confirms a selection.
Rear Panel
AC power input (***)
Connect the supplied power
cord here
.
Phone jack (**)
Connect the supplied phone
cord here and to a wall
phone jack in your home.
Sat In (*)
Connect the coaxial cable
from the Satellite Dish antenna
here. Details are on page 9.
Arrow buttons ( ;:,9 )
Navigates through the Guide and menus.
While watching Satellite programming, use
the
,9 arrows to channel up or down.
TV/VCR Output (*)
Antenna Input (*)
Connect to an off-air antenna or analog cable system.
Channel 3/4 switch : Details on page 10.
S-Video Output (*)
Component Video Output (*)
Power indicator
Lights when the DIRECTV Receiver is on.
POWER button
Turns the DIRECTV
® Receiver on or
puts it in Standby.
Guide button
Displays Program Guide.
MENU button
Displays the Main Menu.
Note : The identification sticker can be located underneath your receiver.
D10-300-6 27/09/04 17:13 Page 7