Fenix ECOSUN Terrace heater - Manual (Page 7)

4. Connection of the panel
The panel is fitted with a 2m long connection lead with a plug.
In the case of connection to a wiring box, the cutting off of a plug is not a reason for loss of warranty. In this case, a switching-off device
in which the distance between disconnected contacts is at least 3.5 mm for all poles must be installed in the wiring.
The heating and switching off/on of the panels can be controlled via switches and remote controls which switch the relays and contac-
tors in the switch board.
Electrical installations must comply with the valid standards in the country where they are installed.
5. Maintenance
This is limited only to dusting and possibly wiping with a damp cloth and detergent. The radiant surface is not cleaned.
Clearance distances.
*there is a danger that the ceiling may be soiled by burnt particles in dusty and smoky environments
Clearance distances from flammable objects:
−
min. 100 cm from the radiant surface
•
the panel mustn´t be placed directly under an electric socket