Fenix ECOSUN Terrace heater - Manual (Page 5)

Instructions for use and installation
TERRACE HEATER
1. Technical data
2. Use
ECOSUN Terrace Heaters are designed for the zonal heating of winter gardens, enclosed and roofed balconies and terraces, garden
tents, churches, etc. – i.e., applications where they are protected against direct contact with the effects of the weather.
ECOSUN TH panels have a significantly lower surface temperature than halogen heaters, and they do not radiate unwanted light
when in operation.
It is possible to use panels at temperatures as low as +5 to +10°C; at lower temperatures the lamellas will become very cold and
the heat they radiate will be almost unnoticeable.
3. Installation
Tiltable brackets are used for the attachment of panels to the ceiling or wall. The brackets are supplied with the panel, disassem-
bled. Panels can also be hung from the ceiling using chains or cords.
Metal wall anchors must be used for the attachment of the brackets, chains or cords.
The radiant panel can be installed at an angle as well as vertically, but it mustn´t
be installed at an angle or vertically in such a way that the supply lead and termi-
nal are at the highest point of the panel. There is higher convection of heat when
the panel is tilted and this heat would irreversibly damage the electrical equip-
ment of the terminal.
Type
Wattage
[W]
Voltage
[V]
Protection
class
IP
Dimensions
[mm]
TERRACE HEATER 10 1000
230 V 1N I IP 45
1080x140x45
TERRACE HEATER 15 1500 1580x140x45
Weight
[kg]
5
7,2