Feelworld DP701T - Manual (Page 9)

9
7. Troubleshootiong
Before calling for assistance, please read carefully below. If you do need
assistance, please call local service center or contact your dealer.
① .No image on screen, I can not turn on the USB Monitor
A: Please check if the USB cable is connected. Please run the "USB
installation
software" by CD disks. For more detail about driver installation,
please refer to 3 " Installing monitor driver "
② . I cannot turn on my USB Monitor screen on.
A: Please check if the USB cable is connected, and then check screen.
Please check if ‘USB Installation Software ‘has been installed properly
.
a) Right-click ‘My Computer’
b) Click ‘Device Manager’s at ‘Hardware’ tab
c) Locate the cursor on PC at the top of the system tree
d) Click ‘Action(A)’→ “Add Hardware(A)”
e) Reboot the PC
* Normal PC recognizes USB Monitor as a generic USB device. Frequent
power on and off of the device may cause USB device error. Please refer to
Microsoft customer support for USB devices troubleshooting
③ . I cannot boot my system after connecting USB Monitor.
A: in case i851 chipset once – Board Type PC system, please disable ‘Legacy
USB support’ option in system.
BIOS setup method may differ from PC to PC, please refer to the User manual
of the PC. Please refer to Microsoft homepage for more detail.
④ . I cannot see DOS opening screen with USB Monitor when my PC systems
is booting up..
USB Monitor is using USB device. Since DOS doesn’t recognize USB Device
while booting –up. USB Monitor cannot get video signal from the system.
⑤ I cannot run 3D graphic game with the 7inch UM screen.
The 7inch USB is using USB 2.0 interface for video data transfer. Therefore
any program that requires 3D high speed graphic acceleration cannot be
displayed properly.
- Restricted
Programs:
a). Real Player (Doesn’t support Extension Mode)
b). 3D Graphic Games
c）. Programs that requires Direct X graphic acceleration
d). Power DVD
e). Win DVD (Version 5 or later)
Supported Multimedia Players