Ethereal TL64 User Manual

Page 5

(A)

Concrete Wall Mounting:

Choose a solid wall area (avoid the hollow wall or the screws in the joint of the
bricks).

Hold the wall mount bracket against the wall. While using a level to verify that
the wall mount bracket is correct, mark the bolt hole locations.

Pre-Drill the marked locations with a 3/8” masonry bit then insert the plastic lag
inserts.

Attach the vertical arms (B) to the back of your display (securely).

Hang the display on the top rail of the wall mount bracket (C).

Before seating the mount into the lower rail of the wall mount bracket connect
and route all of the connecting cables and power cord.

Note:

Be sure to choose a smooth wall area that is strong enough to hold the

weight of the TV and wall mount. The installation should be far away from water
and direct sunlight.