ETA Lori - Manual (Page 21)

Note
– You may put the container for liquids on the scales before turning it on. If you do so,
the scale will turn on automatically when reaching 0.
– The results of measuring the volume of milk differ from measuring the volume of water
due to their density. Milk has subtly higher density than water (approx. 1, 028 x).
i
„ZERO“ OR „TARE“ FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first Load
on the scale, get weight reading. Press A4 TARE button to reset the LCD reading to „0“
before adding next load. Add another item and the display will read the added weight. You
can repeat this operation. If all products are taken away from the weighing plate,a negative
value will appear on the display.
Note 1: „ZERO“ function
When total sum of all loads on scale ≤ 200 g, LCD will show
„0“ each time TARE is pressed. Icon „O“ will show on upper left
corner of LCD, indicating „ ZERO“ function is active. Max. weight
capacity remains unchanged.
Note 2: „TARE“ function
If the total weight is > 200 g, the display (after pressing the
TARE button) will show the icon “T” in the upper left corner of
the display, which indicates the activity of the „TARE“ mode. By
pressing the TARE button in this mode, you will display the total
amount of weights/volumes of all items. If you wish to continue
with fine weighing, just press the TARE button again to reset the
display to 0. The maximum capacity will decrease by the total
weight of all items.
Note:
After removing all items from the weighing surface, the display
will show the total number of weights/volumes with the “-“ button.
Auto shut off
Auto shut-off occurs if display shows ‚0‘ or shows the same
weight reading for 120 sec.
Exceeding loading capacity of the scale
Maximum weight for a product weighing is 5 kg. The display will
show Err Error message in case the weight of the product on
the plate exceeds 5 kg. It means the product weight exceeds
the loading capacity of the scale.
GB
21 / 37