ETA Lori - Manual (Page 20)

Stisknutím tlačítka MODE tedy změníte jednotky vážení následovně:
— In the mode of classic metric system g > ml (water) > ml (milk)
— In the mode of the avoirdupois lb:oz > fl‘oz (water) > fl’oz (milk)
Operation (weighing)
1. Put the scale on suitable flat surface (see I. SAFETY PRECAUTIONS).
2. Put the bowl (if you use one) on the scale before switching it on. Do not put things you
want to weight on the plate before you turn the appliance on!
3. Turn the scale on by pressing on the weighing surface.
4. When the display shows 0, the appliance is ready for weighing.
5. Pressing the MODE button, choose a mode in which you want to operate (WEIGHT -
WATER VOLUME - MILK VOLUME). Pokud chcete změnit režim měrných jednotek
(g - lb:oz; ml - fl´oz), stiskněte tlačítko UNIT.
6. Place the weighed item in the middle of the weighing surface A3 and wait for the value
on the display to stabilize.
7. The scales turns off automatically after 120 minutes being idle.
Operation (measuring volume)
1. Put the scale on suitable flat surface (see I. SAFETY PRECAUTIONS).
2. Turn the scale on by pressing on the weighing surface.
3. When the display shows 0 g, the scale is ready for measuring.
4. Pressing the MODE button, choose a mode in which you want to operate (WEIGHT -
WATER VOLUME - MILK VOLUME). If you want to change the units mode (g - lb:oz: ml
- fl´oz), press the UNIT button.
5. Place the container for liquids in the middle of the weighing surface. Its weight will show.
Then press TARE, which will reset the reading (the display will show 0)
6. Pour the liquid into the prepared container and wait until the value on the display
stabilizes.
7. The scales turns off automatically after 120 minutes being idle.
insert the
container
pour the liquid
20
GB
/ 37