ETA Tradiční suchá žehlička 7246 - Manual (Page 13)

Ironing
Put the iron to the rest position (fig. 4).
Set the level against the mark on the container on the regulation wheel A3 according to the
selected fabric (fig. 2). Plug the power cord A6 to a socket. When the control light A2 goes
out, the proper temperature has been reached.
Warning
The regulation wheel A3 (fig. 2) is marked with international symbols that recommend the
optimum ironing temperature and they are the same as marking on some types of laundry
and textiles (fig. 3).
When the temperature is increased from the cold state or if the temperature is set from
higher to lower, we recommend waiting for a while for stabilization of the ironing plate
temperature.
Different thermal expansivity of the ironing board and cover may cause crackling in the
iron, especially when heating up and cooling down. This is not to be considered a fault.
Storage
After finishing ironing let the iron cool down. Wind the power cord A6 on the back side of
the cover A5 and put the iron to the rest position (fig.5).
Put the appliance at a dry and dust free place, out of reach of children and incapacitated
people.
IV. MAINTENANCE
Unplug the iron from power supply by taking the fork of the power cord out of the
socket! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers,
diluting agents or other solvents)! Wipe all dirt from the ironing board with a damp cloth
or you can use a nonabrasive (liquid) cleaning agent. Wipe the whole iron with a damp
cloth and dry. To avoid scratching the ironing board, protect it against contact with hard,
namely metal objects.
V. ENVIRONMENT
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authorities or at a collection site. Fines can be imposed for improper disposal of
this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power
supply we recommend cutting off the power cord and in this way it will not be possible to
use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
13
GB
/ 26