ETA Profi User Manual

Page 16

16/ 35

II. EQUIPMENT AND ACCESSORY OF ETA VACUUM CLEANER – LINE0467 (pic. 1)

A – vacuum cleaner

A1 – suction opening

A6 – outlet cover

A2 – suction space lid

A7 – cord holder

A3 – lid closure

A8– supply cord

A4 – safety valve

A9 – The START/STOP button

A5 – handle

A10 – wheels

B – accessory

B1 – floor nozzle

B5 – slit nozzle

B2 – suction hose

B6 – dust filter

B3 – suction tubes

B7 – suction micro filter

B4 – cushion nozzle with brush

B8 – nozzle for vacuuming hard floors

III. PREPARATION AND USE

Remove all packaging material, remove the vacuum cleaner and accessory. Plug the fork of

the supply cord

A8 into the el. plug. Assemble the accessory of the cleaner B1, B2, B3 (pic.

2, 3). Floor nozzle

B1 is intended for vacuuming carpets or smooth floors (obr. 4). If the floor

nozzle is equipped with a brush, you may slide it out when vacuuming hard floors. The slit

nozzle

B5 may be used for vacuuming hard–accessible places (pic. 5). The cushion nozzle

B4 may be used for vacuuming different kinds of furniture (pic. 6). Turn the vacuum cleaner

on/off by pressing the switch button

A9 marked with “ ” symbol (pic. 7). You may control

the suction power by the handle regulation on the hose

B2 (pic. 8). After finishing cleaning,

unplug the cleaner from the el. outlet. Curl the supply cord into an oval shape and put in the

holder

A7 (pic. 9). The cleaner may be held by the holder A5 and carried over obstacles

(e.g. doorsills, steps. We recommend turning the cleaner off when carrying.

Dust filter cleaning

If the suction power of the cleaner decreases during operation, the dust filter needs to be

cleaned. Tip out the lid

A2 of the cleaner by pressing closure A3 (pic.10). Then pull the front

of the dust filter

B6 out of the holder (pic. 11). Slide out the lath from one side of the filter (pic.

12), the textile filter will open and the dust can be dumped. The filter needs to be dusted (pic.

13). Put the lath on reversely. Slide the front of the dust filter into the holder in the suction

space of the vacuum cleaner and push all the way. Press to close the lid of the cleaner.

Important precautions

Do not wash, soak etc. the textile dust filter, do not use a damaged textile dust filter!

Suction micro filter

After filling the dust filter approx. 5 times, it needs to be changed for a new one. Loosen the

arrest ring by turning it in the direction of an arrow and remove it (pic. 14). Remove the used

micro filter and dispose it with common house waste. Put the new filter in reversely and fasten

it with the arrest ring. Make sure that the bearing area and sealing elements are functional.

ATTENTION: Neglecting the replacement of the micro filters may lead to failure of the

vacuum cleaner!

For trouble–free operation of the vacuum cleaner, please use the

tested micro–filters recommended by the producer.