Entone Amulet 300 (F1) - Manual (Page 12)

URC 4 User’s Guide
Copyright     2012 Entone, Inc. All rights reserved . 11
v2.5 for URC 4
Chapter
4
4.1 Controlling Your Television and other A/V Devices
The URC 4 can also be used to control TVs and other A/V devices such as DVD players and recorders.
The URC 4 uses InfraRed (IR) light signals to control other devices that the remote is programmed to
control. IR signals travel only short distances (40 feet or less), and cannot go through walls or other solid
objects. You must point the URC 4 directly at these devices, with no objects blocking the line of sight.
Figure 4-1 Controlling Devices using URC 4
You can program URC 4 to control one TV and one AUX device. Use the remote control’s mode keys (i.e.,
“STB”, “TV”, or “AUX”) to control a specific device. When pressed, the selected mode key will light up
confirming your choice. Then you can use the URC 4 to control your STB, TV or AUX device.
You have to program the URC 4 what TV and AUX devices you are using by either 1) entering the 4-digit
device code 2) doing an auto search.
NOTE:
The POWER key can be configured to control both the STB and TV while the URC 4 is in “STB” mode,
please refer to the section “Toggle Power Key Punch-through Functionality” in Chapter 4 for details.
The Volume +/- and MUTE key can be configured to control both the STB and TV while the URC 4 is in
“STB” mode, please refer to the section “Toggle Volume Key Punch-through Functionality” in Chapter 4
for details.