Directed Audio 1200T - Manual (Page 4)

44
© 2004 Directed Electronics, Inc
FEATURES
„ High-speed MOSFET switching
power supply and dual N-channel
MOSFET outputs
„ Stereo, mono, or simultaneous
stereo/mono operation
„ Thermal, DC offset, reverse polarity,
short circuit and over/under
voltage protection
„ Top-mounted controls located under
smoked plexiglass cover
„ Programmable features controlled
via ESP serial databus and
Directed's proprietary Bitwriter
®
tool (998T) **
** The Bitwriter ® unit must have version
1.8 or above to access the amplifier
features menu.
„ Top and side panel ESP I/O ports
for connection for ESP-2 Security
components and current Bitwriter
module with Audio programming
„ Continuously variable 12 dB/octave
two-way crossover (Selectable 24
dB LP/mono mode)
„ Variable 0-15 dB bass EQ function
„ Buffered stereo full-range RCA
output jacks
„ Gold-plated RCA jacks ensure
maximum signal transfer
„ Rugged one-piece extruded heat
sink finished with injection-molded
mounting feet
High-powered car audio
systems may produce
sound pressure levels that
exceed the threshold at which hearing
loss may result.
They may also impair a driver’s ability to
hear traffic sounds or emergency vehi-
cles. Use common sense and practice
safe listening habits when listening to or
adjusting your audio system.
WARNING