EM Acoustics HALO bi-amplified line array system User Manual
Page 18
Page 18 of 39
HALO system User Manual
V2.2 August 2010
Raise the MFG-HALO grid up, lifting the HALO-S subwoofer with it. Once clear of the
ground, undo the four countersunk socket-head bolts which secure the base board to the
HALO-S. Remove the board and retain for array disassembly.
If adding a second subwoofer, repeat the procedure above. If you are only using one
subwoofer, proceed to step 4 below.
Step 4 – Attaching the SLG-HALO sub-link grid
The SLG-HALO grid provides the mechanical link between the HALO-S and the much
shallower HALO enclosure. It is specifically designed to give the same flexibility to the
HALO array is if you were flying straight from a MFG-HALO grid.
This manual is related to the following products: