EM Acoustics HALO bi-amplified line array system User Manual
Page 15
Page 15 of 39
HALO system User Manual
V2.2 August 2010
This process should now be repeated for the rear links – however the rear links are
pivoted permanently on a bolt. As such, simply release the ball-lock pin to allow the link
to sit into the usage position, replace the ball-lock pin and the link is now ready for use.
IMPORTANT NOTE:
For both front & rear links, the locking ball-lock pin MUST be in position prior to
attempting to fly the system.
Step Two – Selecting & fitting pick-up links
The MFG-HALO grid provides two means of attaching the grid to your chosen primary
mounting point. The first, and most common is by using the movable pick-up links which
allow for both single point and dual point pick-up. These links are stored for transit on the
side of the MFG grid and are secured in place by two 3/8” ball-lock pins.