Entone Amulet 200 (D1) User Manual
Page 18
Amulet High Definition Television Receiver User’s Guide
Copyright
2007 Entone, Inc. All rights reserved
.
16
Figure 4-5 Connecting TV using HDMI
NOTE:
HDMI is an evolving technology, so it is possible that some TVs may not operate properly with Amulet.
Component output is the preferred way to connect to your HD TV.
When the HDMI connection cannot be verified by your TV, disconnect the HDMI cable and then
connect it again, or turn off the TV and then turn it on again.
Analog DVI is not supported. If your TV supports digital DVI but not HDMI, you can use an HDMI to DVI
convector cable or adaptor to connect the Amulet HDMI to the TV DVI. In this case, you need to
connect the audio cable separately.
Be sure to use an HDMI cable with the HDMI logo.
If your TV does not support multi-channel audio, the Amulet will output PCM audio only.
Please refer to the next section to set the Component and HDMI output resolution.