Entone Amulet 200 (D1) User Manual

Page 13

Copyright 



Chapter

4.1 Connecting the TV

Amulet offers several options for connecting audio and video to popular TV and audio equipment.

You can connect Amulet to the TV using composite, component, S-Video or HDMI connection. You may
also connect the Amulet to the TV using coaxial cable connection.

If your TV supports 480p, 720p or 1080i pictures, use the HDMI or the component output jacks to connect
to your TV. HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and
uncompressed digital video on a single cable. As a result, audio cables and video cables do not need to be
connected separately. The HDMI output jack is designed to HDMI version 1.1 specifications.

HDMI and component video output support high definition video signal. They will provide the best quality
video signal for HD ready TV sets.

S-Video output will provide the best quality video signal for late-model TV sets. The RCA A/V composite, S-
Video and RF TV output jacks only support 480i pictures.

The following table shows the video and audio output jacks and their supported video formats:

Table 4-1 Video Format

Video Output

Audio Output

Format

HDMI

No separate audio output
required

1080i60, 720p60, 480p60, 480i60
(Selectable and default to 720p60.
Please refer to section Setting
HDMI and Component Output
Resolution)

Component

RCA Audio

1080i60, 720p60, 480p60, 480i60
(Selectable and default to 720p60.
Please refer to section Setting
HDMI and Component Output
Resolution)

S-Video, RCA
Composite

RCA Audio

480i60

RF TV

No separate audio output
required

480i60