Dodge 2010 Grand Caravan User Manual

Page 67

front passenger seat is unoccupied. The BeltAlert

௡ warn-

ing system may be triggered when an animal or heavy
object is on the front passenger seat or when the seat is
folded flat (if equipped). It is recommended that pets be
restrained in the rear seat in pet harnesses or pet carriers
that are secured by seat belts and cargo is properly
stowed.

BeltAlert

௡ Programming

BeltAlert

௡ can be enabled or disabled by your authorized

dealer or by following these steps:

NOTE:

The following steps must occur within the first

60 seconds of the ignition switch being turned to the ON
or START position. Chrysler Group LLC does not recom-
mend deactivating BeltAlert

௡.

1. With all doors closed and the ignition switch in any
position except ON or START, buckle the driver’s seat
belt.

2. Turn the ignition switch to the ON position (do not
start the engine), and wait for the Seat Belt Reminder
Light to turn off.

3. Within 60 seconds of turning the ignition switch to the
ON/RUN position, unbuckle and then re-buckle the
driver’s seat belt at least three times within 60 seconds,
ending with the seat belt buckled.

NOTE:

Watch for the Seat Belt Reminder Light to turn

on while unbuckling and off while re-buckling the seat
belt.

4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have success-
fully completed the programming.

BeltAlert

௡ can be reactivated by repeating this procedure.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE