Elfa Drawer frame, pant rack, décor fascia and accessory tray - Manual (Page 4)

www.elfa.com
Sida 10 av 13
Décor components
To install fascia on wire shelf
Position the fascia
Position the fascia with the opening facing the
wire shelf. The notch in the fascia that hooks onto
the front support wires of the wire shelf should
be at the top. Hook over the top wire with a
downward motion, and secure it to the front of
the shelf.
Use the included clips to secure the fascia to the
wire shelf.
The top of the clip features a groove that accommo-
dates one shelf wire. (FigureA) Once it’s attached
to the underside of a shelf wire, slide it all the way
to the front of the shelf and into the opening of the
fascia for a secure hold. (Figure B).
Repeat with another clip at the opposite end of the
fascia. Add the third clip at the center of the fascia.
1
Position ALL pieces of fascia
before installing clips. NOTE!
A
B
Elfa Lumi AB
Elfagatan 5, 593 87 Västervik
Tel: +46 392-389 10 Fax: +46 392-361 25. E-mail: [email protected]