Electro-Chemical Devices (ECD) H10C - Manual (Page 5)

5
Displays and Key Functions
1. CONDUCTIVITY-
Displays when measuring
conductivity 8. CELL-
Indicates conductivity cell
constant value
2. BAT-
Low Battery Indicator 9. °C/%-
Displays during calibration:
℃: Indicates temperature
reference unit.
%: Indicates temperature
coefficient unit.
3. UNCOMPENSATED-
Distinguishes between
temperature compensated and
uncompensated readings 10. ppt-
Parts per thousand; indicates
salinity measurement.
4. MAIN DISPLAY-
Displays conductivity, salinity
and TDS numerical values 11. uS/mS-
Microsiemens or millisiemens,
indicates conductivity
measurement.
5. CAL-
Calibration mode indicator 12. g/L-
Grams/Liter; indicates TDS
measurement.
6. TDS-
Displays when Total Dissolved
Solids is being measured 13.Temperature and unit
display
7. Salinity-
Displays when salinity is being
measured