DCS -IVH-48 - Manual (Page 14)

Controls
Care And Use
12
Hood Lighting
Blower
We recommend you turn your hood on before you begin cooking to establish fresh
airflow. After you have finished cooking, let the blower run for a few minutes to
clear the air and help keep the kitchen fresh and clean.
The Blower is operated with 2 controls. The switch adjacent to the speed control
turns the blower on/off, while the speed control adjusts the blower speed. Turn the
speed knob clockwise to increase and counterclockwise to decrease the blower
speed.
A single switch controls the 4 halogen lights. The switch controls the brightness of
the lights with Hi/Off/Low. Use only 50w Max. Halogen Narrow Flood replacement
bulbs.
Caution!
Halogen lamps are constructed of a glass bulb with a pressurized
internal filament tube that operates at high temperatures and could be discharged
into the fixture enclosure and/or surrounding environment, thereby creating a risk of
personal injury of fire. When replacing the bulb, let the bulb cool, and assure that
power to light has been turned off. Never allow a hot bulb to come into contact with
water.
Do Not Touch the Hood Light Bulbs when they are in use. They may be hot enough
to cause injury.
Blower
Blower Variable Speed Contr
Hood Lights
Halogen Light Bulb