Digi-Star DataLink - Manual (Page 18)

RF DataLink
14
Example: You had a 4000-pound call weight to deliver to pen 1 and a split load occurred
that left 200 pounds to be fed to pen 1. You could set the split load minimum balance to
300 pounds. In this case, the remainder of the call for pen 1 would not be fed.
This setting is typically set to 50
pounds.
To set this, enter the amount in pounds
that you want to set as your split load
minimum. This setting is feeding
specific. Repeat as needed for each
feeding. Each feeding can have
different settings.
When you have completed your
entries, click [Save].
Operator Interface
To access the operator interface, from the main menu select [Systems], [Defaults], and
[Operator Interface].