Installation – Digi-Star Cab Control 2400 User Manual
Page 7
Operators Manual
D3820-US 7
INSTALLATION
Cab Control Mounting
The Cab Control communicates with a scale indicator using an internal
radio. For best results, place both indicator and Cab Control in locations
not surrounded by metal. Glass does not block radio signals.
NOTE: The Cab Control usually works fine if the scale indicator is
mounted inside the truck cab and the Cab Control is mounted inside the
loader at dashboard level.
Cab Control Connection
Power obtained directly from 12 volt battery. Stationary applications
use120 VAC to 12VDC power cube that plugs into wall outlet.
Connect red wire from power cable to + terminal of 12 volt battery and
black wire to ground.
Cab Control Connection Diagram
Cab Control
To 12VDC Power Supply
1 Red +Terminal
2 Black -Terminal