Digi-Star Cab Control 2400 - Manual (Page 4)

Cab Control
4
See page 7 for installation instructions.
OPERATION
Turn on Cab Control
Communicate With
Different Truck
1. Press .
No signal received, Cab Control
display flashes
NODATA
and scale
number (Example
SCL 1
)
.
Signal received, display matches
scale indicator and indicator is
controlled by Cab Control.
Note:
For scale indicator operation
refer to its manual.
1. Pressing once checks
which scale indicator is
communicating.
2. Repeatedly press until
desired indicator number is
displayed.
Note: If scale number is not
displayed, see setting up Cab
Control page 6.
HELLO
Nodata
0
1
1