Page 3 of 3, Page 4 of 4 – Digi-Star HORIZON XLS User Manual
Page 8
8
Page 3 of 3
ID MODE:
EID ONLY, VID ONLY, EID + VID or
NO ID QUICK WEIGH
ENABLE AUTO VID:
OFF or ON
AUTO VID START:
Enter VID starting code i.e. 0001
ENABLE PID:
YES or NO
PID DEFAULT:
Enter the Premise Identity
ENABLE CODE 1:
YES or NO
CODE 1 DEFAULT:
If the code is common for the weighing
session, enter the text and this will be
recorded with each weight. If the code
varies for each weight then leave this blank.
Default codes can be used for recording
additional fixed dose health medication.
ENABLE CODE 2:
YES or NO
CODE 2 DEFAULT:
Enter common text or leave blank
ENABLE CODE 3:
YES or NO
CODE 3 DEFAULT:
Enter common text or leave blank
WEIGHING UNITS:
KG or LB
BLUETOOTH POWER:
OFF or ON
BT BAUD RATE:
Select 9600 typically
BLUETOOTH SEARCH:
Turn on the bluetooth EID reader.
Press select on the indicator to search for
the bluetooth reader. The bluetooth reader
will be added to the list of BLUETOOTH
KNOWN TARGETS.
SELECT READER:
Press select to select the reader
PASS KEY:
Enter the bluetooth reader pass key
CONNECT TO READER:
Press select to connect to the reader
PC DISCOVERY:
Press select so the PC can discover the
indicator
BROWSER INTERFACE:
Select ON to connect to the PC
Page 4 of 4