Page 2 of 3 – Digi-Star HORIZON XLS User Manual
Page 7
7
Page 2 of 3
COM PORT 1 MODE:
Select OFF, or
REAL TIME WEIGHT sends weight data
when the weight is recorded,
REAL TIME EID + WGT sends EID and
weight data when the weight is recorded,
PROFILE UPLOAD RAW sends raw data
continuously,
PROFILE UPLOAD KG sends weight data
continuously,
EID READ/PC CONNECT for an EID reader
or for uploading data to a PC
COM 1 BAUD RATE:
Match to the PC or reader
COM 1 POWER:
Select OFF. For supplying power through
the RS232 connection.
COM PORT 2 MODE:
EID READ / PC CONNECT currently is the
only selection
COM 2 BAUD RATE:
Select 9600 for most readers
COM 2 POWER:
Select ON to power the reader
TEXT HIGHLIGHT MODE: SHADED NORMAL, BLACKOUT INVERSE,
FLASH INVERSE
LOADBAR MODEL:
Select a preset load bar or create a custom
setting
mV/V SETTING:
In custom setting enter the mV/V load
cell rating
LOADBAR FULL SCALE:
In custom setting enter the suggested
rating on the loadbar
LOADBAR mV:
Displays loadbar output in mV/V
AUTO CALIBRATION:
If calibration is required, enter the known
weight and press select to start. Place the
weight on the bar and press select. The
indicator will calibrate to the known weight.
Set the weighing mode and algorithm
before auto calibration.
ALGORITHM MODE:
START 10LB for weighing livestock
START 20LB for weighing livestock
STATIC for static loads
BACKLIGHT MODE:
ON, OFF or AUTO
TARE WEIGHT:
Enter the container weight