Digi-Star Diet Manager Full Guide - Manual (Page 7)

7 Diet Manager User’s Guide
Entering the program Serial Number
After selecting the program language, enter the 6 digit serial number of
the program. This number can be found on the CD. Click Ok when
done.
Find Comm
After installation of the software, the first time you run the Diet Manager  program, the Find Comm
program will automatically run. This program is designed to find the working comm. port and data transfer
device used with your system.
After clicking on Start, the program will begin searching for a working comm. Port and DataKey
™ . This
search can take up to several minutes. After finding the comm. port and device, the program will update
the Diet Manager

program and start the program.
A working DataKey
™ must be inserted in the DataKey ™ Docking Station.
Selecting the Date Format
Select the Date Format you wish to use and click Save.
Note: The selected Date Format should match the Date Format of the EZ3500 Indicator.
Weigh Mode
Select your Weigh Mode and click Ok.
Note: The values entered will not convert if mode is changed later.