Digi-Star TST7600 with TMR Tracker - Manual (Page 34)

TST7600 with TMR Tracker
Page 34 TST7600 Touch Screen D3989-US Rev A
Settings :
Require User Login: When enabled, requires password to log on unit at start up.
Advance Delay Seconds: Number of seconds prior to automatically advancing ingredient/pen.
Tolerance % to Auto Accept ingredient /Pen: % of Ingredient/Pen that must be met before
auto advance (0 is the same as disabled).
Tolerance over Lock (for negative weight): Prevents the scale from auto-advancing if the
amount being loaded or unloaded has exceeded the preset tolerance amount and has caused
the scale to display “OVER”.
Pre-Alarm: Enter a value to activate an early warning that scale is reaching the preset weight.
Re-Use: (Only works with loads mode) When set to enable, "Loads Mode" recipes will remain
active in the Touch Screen so they can be “re-used” for additional loads. The information for
each load is also stored with a new, individual batch number that is different from the original
batch number sent to the indicator. This allows each “re-used” load to be identified by TMR
Tracker.
Cancel
Brightness
Cab Control
Key Mapping
Enter
Volume
Change Setup#
Change Cal#
Personalize
Buttons
Set Date/Time
Save
Update
Software
Tab 1
Software
Version