Digi-Star Stockweigh 300 - Manual (Page 15)

Weigh Methods
D3734-US Rev E SW300 User’s Manual 11
WEIGH METHODS
Select “Lock On” for animal weighing. Use “General” for general weighing.
General Weigh Method
All purpose weigh method for weighing stable loads. It does not “Lock On”
the weight.
Lock-on Weigh Method
Weighs active animals and displays stable accurate weight. Lock-On
sensitivity is
adjusted using “LOCKON” menu (see page 13).
 Scale “Locks-On” to weight.

Weight is displayed stable, even if motion never stops.
 Small „L‟ appears on left side of display indicating weight is “Locked-
On”.
 Animal‟s weight must be greater than 0.67% of scales “capacity” (CAP)
before system can “Lock-On”.
Example: If “CAP” = 4000, 27 lbs. or more is required for scale to lock-
on.
Note: Use a weight value for Zero Tracking (
ZTRACK
) (see page 13)
that is less than 0.67% of capacity.
To break lock, add or remove WEIGHT FROM SCALE PLATFORM. The
default setting is 50%.
 The weight value that is used to “break the lock” and return to normal
weighing can be selected by choosing a value from 01 to 99%. (see
page 13) For example, if unlock is set to 10(%) and weight is locked
at 1000, display will “unlock” and return to normal weighing at 900,
once 10% (100) is removed.
 “Locked-On” weight can be “rechecked”, press . this breaks “lock”
and scale recalculates weight.