Digi-Star EZ 4600 Manual DataKey - Manual (Page 13)

Data Transfer
D3716-US REV D EZ4600 User’s Manual 9
DATA TRANSFER
DataKey Mode To upload data:
1. Insert DataKey turn clockwise.
2. Press .
NOTE: If indicator displays
uncompleted data in memory,
press to overwrite
uncompleted data.
Remove DataKey when transfer
complete.
To download data:
Insert DataKey, turn clockwise,
indicator automatically sends data to
DataKey. Remove DataKey.
RF DataLink Modes
Operation Message
DataLink connects with indicator
←PC→
DataLink sends data to indicator
DL←IN
Indicator receives data
ALL FEED LINES RECIVED -PRESS
RECIPE KEY TO CONTINUE
Data compete, indicator sends data to
DataLink
←PC→
Data sending
DL→OUT
To send data to PC if operator does
not complete all feeding at end of
feeding schedule. Press until
display shows message (right column),
press to select.
EZ→PC
The indicator marks uncompleted data as completed and sends feeding
data to DataLink.
NOTE: After sending, uncompleted data erased.
NOTE: Indicator may also be manually programmed, see page 25 for
instructions.
2
1