Digi-Star GT400 - Manual (Page 17)

Menus and Calibration
D3831 Rev B GT400 User’s Manual 13
SETTING
[display]
OPTIONS [displayed]
BOLD=DEFAULT
DESCRIPTION
PRINT FORMAT
(prtfmt)
AUTO
WTONLY
DOWNLD
DT+TM
ID+TM
IDWTTM
ANIMAL
3200-A
3200-B
32-TMR
DATCHI
FDINFO WTRCTM
EIDINF
EID
EIDVID
PRTAC1
PRTAC2
PRTAC3
FEED-1
PRTAC4
PRTAC5
PRTAC6
BUFINF
Select alternate & comma (CSV)
formats.
(zerout)
Perform the Zero/Balance for
SCOREM #11 weight output and
Analog Output Option (4-20mA).
(CI DLY) OFF,
.I0
, .25, .50, .75, I-5
Choose the number of seconds
the printer will delay before
advancing to the next print line.
( C2 DLY ) OFF
, .I0, .25, .50, .75, I-5
Choose the number of seconds
the printer will delay before
advancing to the next print line.
(prtacc)
Reset Print Accumulator
MENU 3. SCALE CALIBRATION SETTINGS
DISPLAY COUNT
( COUNT )
.0I,
.
02,.05,.I,.2,.5,I,2,5,
I0
,20,
50,I00
Count set too small, readings
unstable and indicator not accurate
DISPLAY UNIT
(lb-kg)
LB
/ KG
Unit of measure.
When changing weight unit using
long form, calibration is adjusted so
scale displays accurately in new
display unit.
CAPACITY
(cap)
85000
Enter MAXIMUM weight
measurable on scale.
MENU 4 – NOT USED