Digi-Star EZ 3600 Manual DataKey - Manual (Page 13)

Data Transfer
D3715 Rev D EZ3600 User’s Manual 9
DATA TRANSFER
DataKey Mode To upload data:
2. Insert DataKey turn clockwise.
3. Press .
Note:
If indicator displays
uncompleted data in memory,
press to overwrite
uncompleted data.
Remove DataKey when transfer
complete.
To download data:
Insert DataKey, turn clockwise,
indicator automatically sends data
to DataKey. Remove DataKey.
RF DataLink Modes
Operation Message
DataLink connects with indicator
←PC→
DataLink sends data to indicator
DL←IN
Indicator receives data
ALL FEED LINES RECIVED -PRESS
RECIPE KEY TO CONTINUE
Data compete, indicator sends data to
DataLink
←PC→
Data sending
DL→OUT
To send data to PC if operator does
not complete all feeding at end of
feeding schedule. Press until
display shows message (right column),
press to select.
EZ→PC
The indicator marks uncompleted data as completed and sends
feeding data to DataLink.
Note:
After sending, uncompleted data erased.
Note:
Indicator may also be manually programmed, see page 23 for
instructions.
2
1