Chapter 3, Boot – DFI HU101 User Manual

Page 50

www.dfi .com

Chapter 3 BIOS Setup

Chapter 3

Memory Information

Memory RC Version
Memory Frequency
Total Memory
Memory Voltage
DIMM#1
DIMM#2
CAS Latency (tCL)
Minimum delay time
CAS to RAS (tRCDmin)
Row Precharge (tRPmin)
Active to Precharge (tRASmin)



1.7.0.0
1600 Mhz
12288 MB (DDR3)
1.35V
8192 MB (DDR3)
4096 MB (DDR3)
11

11
11
28

Chipset

Memory Configuration

This field only displays the memory configuration.



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit

Setup Prompt Timeout

Selects the number of seconds to wait for the setup activation key. 65535(0xFFFF)

denotes indefinite waiting.

Bootup NumLock State

This allows you to determine the default state of the numeric keypad. By default, the

system boots up with NumLock on wherein the function of the numeric keypad is the

number keys. When set to Off, the function of the numeric keypad is the arrow keys.

Quiet Boot

Enables or disables the quiet boot function.

Fast Boot

Enables or disables the boot with the initialization of a minimal set of devices required

to launch the active boot option. Has no effect on BBS boot options.

Boot Option #1/#2

Sets the system boot order.

Hard Drive BBS Priorities

Sets the order of the legacy devices in this group.

Boot

Number of seconds to
wait for setup activation
key.
65535(0xFFFF) means
indefi nite waiting.

Boot Confi guration

Setup Prompt Timeout

Bootup NumLock State

Quiet Boot

Fast Boot

Boot Option Priorities

Boot Option #1
Boot Option #2

Hard Drive BBS Priorities



CSM Parameters

Save & Exit

Chipset

Advanced

Security

Main

Boot

[On]

[Disabled]
[Disabled]

[P1: ST160LT007-9ZV1...]
[UEFI: TOSHIBA Trans...]