DFI AR100-DR - Manual (Page 57)

57
3
BIOS Setup
Onboard Devices
HD Definition Audio
GPP GIGA LAN 1
GPP GIGA LAN 2
Onboard Lan Boot ROM
KBC Input Clock
Onboard Serial Port 1
Onboard Serial Port 2
PWRON After PWR-Fail
Phoenix - AwardBIOS CMOS Setup Utility
Onboard Devices
Item Help
Menu Level

↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[12 MHz]
[3F8/IRQ4]
[2F8/IRQ3]
[Off]
The settings on the screen are for reference only. Your version may not be identical to
this one.
HD Definition Audio
Enables or disables the onboard HD audio.
GPP GIGA LAN 1 and GPP GIGA LAN 2
Enables or disables the onboard LAN.
Onboard LAN Boot ROM
Enable this field if you wish to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly.
If you wish to change the boot ROM’s settings, type the and
keys simultaneously when prompted during boot-up. Take note: you will be
able to access the boot ROM’s program (by typing + ) only
when this field is enabled.
KBC Input Clock
This is used to select the input clock of your keyboard. The options are:
8MHz and 12MHz. The default is 8MHz.
Onboard Serial Port 1 and Onboard Serial Port 2
Auto
The system will automatically select an I/O address for the onboard serial
port 1 and serial port 2.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3
Allows you to manually select an I/O address for the onboard serial port 1
and serial port 2.
Disabled
Disables the onboard serial port 1 and/or serial port 2.