Bios setup – DFI QB701-B User Manual

Page 28

BIOS Setup

CPU Confi guration

This section is used to confi gure the CPU. It will also display the detected CPU
information.

Enable or Disable Intel(R)
SpeedStep(tm)

CPU Confi guration

Processor Type
EMT64
Processor Speed
System Bus Speed
Ratio Status
Actual Ratio
System Bus Speed
Processor Stepping
Microcode Revision
L1 Cache RAM
L2 Cache RAM
Processor Core
Hyper-Threading

Intel SpeedStep

Hyper-Threading
Execute Disable Bit
Limit CPUID Maximum
Intel Virtualization Technology

Advanced

Intel SpeedStep

Enabled or disabled Intel(R) SpeedStep(tm).

Hyper-threading

Enable this fi eld for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for Hyper-
Threading technology. When disabled, only one thread per enabled core is
enabled.

Execute Disable Bit

When this fi eld is set to Disabled, it will force the XD feature fl ag to always
return to 0.

Limit CUPID Maximum

The CPUID instruction of some newer CPUs will return a value greater than
3. The default is Disabled because this problem does not exist in the Win-
dows series operating systems. If you are using an operating system other
than Windows, this problem may occur. To avoid this problem, enable this
fi eld to limit the return value to 3 or less than 3.

Intel Virtualization Technology

When this fi eld is set to Enabled, the VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.

Intel (R) Atom (TM) CPU
Supported
1600 MHz
400 MHz
16
16
400 MHz
20661
260
56 k
512 k
Single
Supported

[Enabled]

[Enabled]
[Enabled]
[Disabled]
[Disabled]



Select Screen



Select Item

Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous

Values

F3: Optimized

Defaults

F4: Save & Exit
ESC: Exit